FAST CURE

Resin Warehouse Fast Cure Resin is a 2 part (2 parts A and 1 part B) 2:1 ratio mix epoxy resin which when mixed with hardener sets to a hard, firm finished product. Resin is resistant to most household chemicals and can withstand surface temperatures around 80°C.  This resin is specially formulated to cure fast and can be poured up to 10mm in thickness. Great as a thicker top coat or items for art/craft, Jewellery the needs to cure fast and it will still leave you that crystal clear finish.

____________________________________________________________________________________________________________________________________________________________________________________

Directions for use: Mix resin and hardener in 2:1 ratio (By Volume not by weight). Using a plastic container for mixing and mix thoroughly scraping sides of container to fully integrate products. Please use a clean, free of contamination mixing container. We suggest once mixed you pour into a second container and mix again so Part A & Part B is completely mixed. Once the product is poured into the mould, let the resin settle allowing air bubbles, foam to float to the surface. Any remaining bubbles or Foam can be removed with a heat gun or Blow torch.

The curing time for Fast Cure can take up to 1-2 days depending on ambient temperature.

• Crystal Clear Finish
• Food contact safe
• Pot life 50-75 minutes depending on ambient room temp (20° approx)
• Self Level Mixture: leaving consistent thickness up to 10mm
• Superior Air Release: Micro bubble release formula
• UV Resistant Formula: Added UV Inhibitors resist yellowing when exposed to the sun and Ultra Violet light
• Minimal odour
• Easy To Use: 2 to 1 by volume mix ratio
• Impact Resistant: Cures super strong, leaving a smooth impact resistant surface
• Voc Free
• Meets Australian Standard AS 2311-2017 and ASTM D3960-05
• Zero Solvent; BPA Free; Eco Friendly
• Data sheets available upon request